Feeding machine

1、 Overview

The JLH series hydraulic feeding machine for melting furnaces is suitable for mechanized feeding of aluminum ingots, waste materials, and auxiliary materials in the aluminum and recycled aluminum industry. Compared with forklift feeding, it reduces the rough damage of forklifts to the furnace mouth and extends the service life of the furnace mouth; Compared to manual feeding, it can greatly improve labor efficiency, reduce employee labor intensity, and mitigate the danger of close range manual feeding operations. Therefore, using hydraulic push plates to gently and evenly feed is an efficient and safe advanced feeding method.

Our company's JLH series furnace feeders draw on the strengths of many others, and systematically rectify and improve various problems reflected in the daily operation of commonly used feeders, achieving good results in reliability, stability, and smoothness of JLH series furnace feeders.

The specifications and dimensions of the JLH series furnace feeder produced by our company need to be tailored according to the actual furnace mouth size and customer feeding tonnage requirements.

2、 Technical parameters of JLH series feeder (conventional)

1. Dimensions: Customized according to actual requirements

2. Material of pushing box: boiler container plate δ 16mm

3. Push box trolley speed: 3m/min

Pushing speed: 3-10m/min

4. Feeding machine operation mode: horizontal walking, vertical feeding.

5. Lateral walking drive mode: driven by the driving motor of the vehicle,

Motor power: 0.75-1.5kw * 2

Speed: 5m/min

Vertical feeding drive mode: hydraulic cylinder propulsion.

6. Hydraulic station specifications

Flow rate: Q=25-40L/min

Motor power: 7.5/11,18.5KW

Rated working pressure: P=6-10MPa/cm2

7. Oil cylinder specifications

Car oil cylinder: diameter 120/70mm, stroke L=2000mm.

Pushing oil cylinder: diameter 150/100mm, stroke L=3000mm.